System
Distribution: Mandrakelinux 10.1beta1
by update of a 10.0 official
Hardware
Sagem 800 E2 (AA?)
AthlonXP2500??+ @ Asus A7N8X-Deluxe (nforce2)
512Ram
partition : ext3
Manual Install
#urpmi eagle-usb
... (OK)
# eagleconfig
=> 11 free degroupé
=> my IP in static
# startadsl
=>Ok
# ping free.Fr
PING free.Fr (213.228.0.42) 56(84) bytes of data.
64 bytes from www1.free.fr (213.228.0.42): icmp_seq=1 ttl=60 time=47.7 ms
64 bytes from www1.free.fr (213.228.0.42): icmp_seq=2 ttl=60 time=54.2 ms
64 bytes from www1.free.fr (213.228.0.42): icmp_seq=3 ttl=60 time=45.2 ms
# eaglediag -a
Diagnostic (v1.6 20040504) driver eagle-usb 20040812191808
# System Information
Linux shal 2.6.8-0.rc2.2mdk #1 Wed Jul 21 19:28:10 CEST 2004 i686 AMD Athlon(tm) XP 2500+ unknown GNU/Linux
Mandrakelinux release 10.1 (Beta 1) for i586
Linux version 2.6.8-0.rc2.2mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.4.1 (Mandrakelinux (Alpha 3.4.1-2mdk)) #1 Wed Jul 21 19:28:10 CEST 2004
gcc version 3.4.1 (Mandrakelinux (Alpha 3.4.1-3mdk)
# Dependances
kernel-source-2.6.8-0.rc2.2mdk
le paquetage ppp n'est pas installé
le paquetage dhcp-client n'est pas installé
le paquetage dhcpcd n'est pas installé
lrwxrwxrwx 1 root root 22 aoû 12 00:28 linux -> linux-2.6.8-0.rc2.2mdk
drwxr-xr-x 15 573 573 4096 jun 29 22:41 linux-2.4.25
-rw-r--r-- 1 root root 30626548 fév 18 14:36 linux-2.4.25.tar.bz2
drwxr-xr-x 4 root root 4096 jun 27 20:11 linux-2.6.3-13mdk
drwxr-xr-x 3 root root 4096 jui 7 23:31 linux-2.6.3-14mdk
drwxr-xr-x 3 root root 4096 aoû 12 00:28 linux-2.6.3-15mdk
drwxr-xr-x 20 root root 4096 mai 26 21:47 linux-2.6.3-9mdk
-rw
1 oco users 35092228 jun 20 18:04 linux-2.6.7.tar.bz2
drwxr-xr-x 21 root root 4096 aoû 12 00:28 linux-2.6.8-0.rc2.2mdk
Warning : available gcc and the version used to compile the kernel differ
Advice : that's a standard problem on debian, revert to gcc version used for kernel
# Kernel config : usb modules
eagle-usb 103008 0
ohci1394 28772 0
ieee1394 287320 2 eth1394,ohci1394
ehci-hcd 25060 0
ohci-hcd 17892 0
usbcore 93764 5 eagle-usb,ehci-hcd,ohci-hcd
# pci & usb configuration (check for latency, only keep relevant lines about USB)
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0
FireWire? (IEEE 1394): nVidia Corporation nForce2
FireWire? (IEEE 1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:04.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
01:06.0 Multimedia video controller: Brooktree Corporation
Bt878? Video Capture (rev 11)
01:06.1 Multimedia controller: Brooktree Corporation
Bt878? Audio Capture (rev 11)
01:07.0 Multimedia audio controller: Ensoniq 5880
AudioPCI? (rev 02)
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:0a.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo Banshee (rev 03)
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev 193).
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 0, function 1:
RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev 193).
Bus 0, device 0, function 2:
RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev 193).
Bus 0, device 0, function 3:
RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev 193).
Bus 0, device 0, function 4:
RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev 193).
Bus 0, device 0, function 5:
RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev 193).
Bus 0, device 1, function 0:
ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev 164).
Bus 0, device 1, function 1:
SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev 162).
IRQ 23.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
I/O at 0xe400 [0xe41f].
Bus 0, device 2, function 0:
USB Controller: nVidia Corporation nForce2 USB Controller (rev 164).
IRQ 22.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xed001000 [0xed001fff].
Bus 0, device 2, function 1:
USB Controller: nVidia Corporation nForce2 USB Controller (#2) (rev 164).
IRQ 21.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xed002000 [0xed002fff].
Bus 0, device 2, function 2:
USB Controller: nVidia Corporation nForce2 USB Controller (rev 164).
IRQ 20.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xed003000 [0xed0030ff].
Bus 0, device 8, function 0:
PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev 163).
Master Capable. No bursts. Min Gnt=10.Max Lat=6.
Bus 0, device 9, function 0:
IDE interface: nVidia Corporation nForce2 IDE (rev 162).
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
I/O at 0xf000 [0xf00f].
Bus 0, device 13, function 0:
FireWire? (IEEE 1394): nVidia Corporation nForce2
FireWire? (IEEE 1394) Controller (rev 163).
IRQ 22.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xed004000 [0xed0047ff].
Non-prefetchable 32 bit memory at 0xed005000 [0xed00503f].
Bus 0, device 30, function 0:
PCI bridge: nVidia Corporation nForce2 AGP (rev 193).
Master Capable. Latency=32. Min Gnt=2.
Bus 1, device 4, function 0:
Ethernet controller: Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 19).
IRQ 17.
Master Capable. Latency=32. Min Gnt=23.Max Lat=31.
Non-prefetchable 32 bit memory at 0xe7000000 [0xe7003fff].
I/O at 0xc000 [0xc0ff].
Bus 1, device 6, function 0:
Multimedia video controller: Brooktree Corporation
Bt878? Video Capture (rev 17).
IRQ 16.
Master Capable. Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xea001000 [0xea001fff].
Bus 1, device 6, function 1:
Multimedia controller: Brooktree Corporation
Bt878? Audio Capture (rev 17).
IRQ 16.
Master Capable. Latency=32. Min Gnt=4.Max Lat=255.
Prefetchable 32 bit memory at 0xea000000 [0xea000fff].
Bus 1, device 7, function 0:
Multimedia audio controller: Ensoniq 5880
AudioPCI? (rev 2).
IRQ 19.
Master Capable. Latency=32. Min Gnt=12.Max Lat=128.
I/O at 0xc400 [0xc43f].
Bus 1, device 8, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
IRQ 18.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xc800 [0xc8ff].
Non-prefetchable 32 bit memory at 0xe7004000 [0xe70040ff].
Bus 1, device 10, function 0:
VGA compatible controller: 3Dfx Interactive, Inc. Voodoo Banshee (rev 3).
IRQ 16.
Non-prefetchable 32 bit memory at 0xe4000000 [0xe5ffffff].
Prefetchable 32 bit memory at 0xe8000000 [0xe9ffffff].
I/O at 0xcc00 [0xccff].
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 1110:9021 Analog Devices Canada, Ltd (Allied Telesyn)
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
# interruptions' affectation
CPU0
0: 2299748 local-APIC-edge timer
1: 2246 IO-APIC-edge i8042
9: 0 IO-APIC-level acpi
12: 211830 IO-APIC-edge i8042
14: 27293 IO-APIC-edge ide0
15: 27446 IO-APIC-edge ide1
16: 112904 IO-APIC-level bttv0
17: 25216 IO-APIC-level
SysKonnect? SK-98xx
18: 5462 IO-APIC-level eth1
19: 0 IO-APIC-level es1371
20: 8 IO-APIC-level ehci_hcd
21: 223142 IO-APIC-level ohci_hcd
22: 3 IO-APIC-level ohci_hcd, ohci1394
NMI: 0
LOC: 2299896
ERR: 0
MIS: 0
# disk uses dma ? [ OK ]
# module loaded ? [ OK ]
# modem operational ? [ OK ]
eagle-usb status display
Driver version 1.9.8
USB Bus : 002 USB Device : 005 Dbg mask: 0x0
Ethernet Interface : eth3
MAC: 00:60:4c:11:da:6c
Tx Rate 0000000384 Rx Rate 0000005632 Crc 0000000000
FEC 0000000483 Margin 0000000022 Atten 0000000032 dB
VID-CPE 0000000000 VID-CO 0000000028 HEC 0000000142
VPI 0000000008 VCI 0000000036 Delin GOOD
Cells Rx 0000020251 Cells Tx 0000004780
Pkts Rx 0000002924 Pkts Tx 0000002856
OAM 0000000000 Bad VPI 0000000658 Bad CRC 0000000000
Oversiz. 0000000000
Modem is operational
# Config eagle : degroupe Free 8 24 4
# dhcpclient launched ?
# Service for connection [ OK ]
# /etc/resolv.conf should contain the DNS
# search chez.moi
nameserver 212.27.32.176
nameserver 212.27.32.177
nameserver 212.27.39.2
# nameserver 192.168.0.2
# ppp temp entry
eth0 Lien encap:Ethernet HWaddr 00:0E:A6:54:35:37
eth1 Lien encap:Ethernet HWaddr 00:50:
FC:6F (interwiki):B9:55
eth2 Lien encap:UNSPEC HWaddr 00-E0-18-00-00-58-04-A5-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST
MTU:1500 (interwiki) Metric:1 (interwiki)
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth3 Lien encap:Ethernet HWaddr 00:60:4C:11:
DA:6C (interwiki)
lo Lien encap:Boucle locale
sit0 Lien encap:IPv6-dans-IPv4
NOARP
MTU:1480 (interwiki) Metric:1 (interwiki)
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
82.67.112.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 82.67.112.254 0.0.0.0 UG 0 0 0 eth3
# ping IP ? [ OK ]
# test DNS resolution ? [ OK ]
Complete diagnostic has been saved on /var/log/eagle-usb/eagle_diag_20040812191808.txt
Please keep only relevant data and remove personal informations.
All work at the first try.
but the bad VPI seem to be high at the start.
after download a kernel ;-) :
# eaglestat
eagle-usb status display
Driver version 1.9.8
USB Bus : 002 USB Device : 005 Dbg mask: 0x0
Ethernet Interface : eth3
MAC: 00:60:4c:11:da:6c
Tx Rate 0000000384 Rx Rate 0000005632 Crc 0000000000
FEC 0000000483 Margin 0000000022 Atten 0000000032 dB
VID-CPE 0000000000 VID-CO 0000000028 HEC 0000000142
VPI 0000000008 VCI 0000000036 Delin GOOD
Cells Rx 0000798737 Cells Tx 0000022080
Pkts Rx 0000028049 Pkts Tx 0000011803
OAM 0000000000 Bad VPI 0000000660 Bad CRC 0000000000
Oversiz. 0000000000
Modem is operational
Mandrake control Install
Doesn't work!!
I do a add new connection=>adsl=>sagem=>[Manual or DHCP]=>yes=>yes=> freeze of the window
