[
TestMandrake101 ] [
TestMandrake101Tux ]
Notes
arg I had nearly finished when my system freezed :-( (as usual only the mouse was working... then not any more and alt-sys key did not work any more... arg arg arg, reboot.
Sorry, I configured the driver at install' so I've not taken any snapshot either (next time I'd better follow my test plan ;-)
Hardware
- Sagem Fast 800 AB for ISP "Free non dégroupé"
- Athlon XP1700 + MSI-6380 K7T266 pro2 256 MB RAM
- Geforce 4MX440 Pixelview
partition used for test :
Software
Synthesis
- took 36 mn to install, added nVidia 6111 driver
- my USB was recognized without any specific options (which was not the case with Mandrakelinux 10) and at install : I'll close bug 8711
- Mdk101RFE for enhancements needed
- one small bug : eaglestat displays eagle-usb driver not loaded
Install
- configured modem at install => recognized as Modem Sagem USB (would be better as Modem ADSL USB : either Sagem, Comtrend or other based on eagle-usb chipset for neuf telecom users with a comtrend ct 361...)
- could not connect... well should (may ?) be corrected in beta2 to get latest updates
- I chose standard for security level and configured shorewall (ok ppp+ is proposed)
- reboot ...
- I had bug 10605 X sessions are slow (windows being redrawn slowly when changing desktop) because I changed the name of my computer => was correctly put in /etc/sysconfig/network but not in /etc/hosts so i added it (see below)
1st boot
- I think it got connected at boot
- I'm not sure if connections was asynchronous as eth0 took time to initialize (no IP configured but cable + other pc up...)
- shorewall is activated after connection : well it should block everything before connecting then open what the rules permit ? (I don't know if this functionality is implemented ?)
Script content
- /etc/ppp/peers/ppp0 : same as Tux
- /etc/sysconfig/network-scripts/ I've got one ethernet card
- ifcfg-eth0 => rights -rwxr-xr-x
DEVICE=eth0
BOOTPROTO=dhcp
NETMASK="255.255.255.0"
ONBOOT=yes
- ifcfg-eth1 => should not exist, rights are -rw-r--r--
DEVICE=eth1
BOOTPROTO=dhcp
ONBOOT=yes
HOSTNAME=
BenAthlux
NETWORKING=yes
127.0.0.1 localhost
BenAthlux
/var/log/messages
here are extracts of /var/log/messages for 1st boot
Aug 7 12:44:21 localhost kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=305 devfs=mount acpi=ht resume=/dev/hda7 splash=silent
Aug 7 12:44:21 localhost kernel: ACPI: Subsystem revision 20040326
Aug 7 12:44:21 localhost kernel: ACPI: Interpreter disabled.
Aug 7 12:44:21 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 7 12:44:21 localhost kernel:
PnPBIOS?: Disabled
Aug 7 12:44:21 localhost kernel: PCI: Probing PCI hardware
Aug 7 12:44:21 localhost kernel: PCI: Probing PCI hardware (bus 00)
Aug 7 12:44:21 localhost kernel: PCI: Using IRQ router default [1106/3074] at 0000:00:11.0
Aug 7 12:44:21 localhost kernel: PCI->APIC IRQ transform: (B0,I8,P0) -> 19
Aug 7 12:44:21 localhost kernel: PCI->APIC IRQ transform: (B0,I17,P3) -> 26
Aug 7 12:44:21 localhost last message repeated 2 times
Aug 7 12:44:21 localhost kernel: PCI->APIC IRQ transform: (B0,I17,P2) -> 21
Aug 7 12:44:21 localhost kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Aug 7 12:44:21 localhost kernel: usb 1-2: new full speed USB device using address 2
Aug 7 12:44:21 localhost kernel: [eagle-usb] driver V1.9.8 loaded
Aug 7 12:44:21 localhost kernel: [eagle-usb] New pre-firmware modem detected
Aug 7 12:44:21 localhost kernel: [eagle-usb] Uploading firmware..
Aug 7 12:44:21 localhost kernel: [eagle-usb] Binding eu_instance_t to USB 001/002
Aug 7 12:44:21 localhost kernel: usbcore: registered new driver eagle-usb
Aug 7 12:44:21 localhost kernel: kjournald starting. Commit interval 5 seconds
Aug 7 12:44:21 localhost kernel: usb 1-2: USB disconnect, address 2
Aug 7 12:44:21 localhost kernel: [eagle-usb] Pre-firmware modem removed
Aug 7 12:44:21 localhost kernel: usb 1-2: new full speed USB device using address 3
Aug 7 12:44:21 localhost kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
Aug 7 12:44:21 localhost kernel: [eagle-usb] Interface 0 accepted.
Aug 7 12:44:21 localhost kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-003
Aug 7 12:44:21 localhost kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
Aug 7 12:44:21 localhost kernel: [eagle-usb] ioctl EU_IO_DSP received
Aug 7 12:44:21 localhost kernel: [eagle-usb] Loading DSP code to device...
Aug 7 12:44:21 localhost kernel: [eagle-usb] DSP code successfully loaded to device
Aug 7 12:44:21 localhost kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
Aug 7 12:44:21 localhost kernel: [eagle-usb] ioctl EU_IO_DSP received
Aug 7 12:44:21 localhost kernel: [eagle-usb] Loading DSP code to device...
Aug 7 12:44:21 localhost kernel: [eagle-usb] DSP code successfully loaded to device
Aug 7 12:44:21 localhost kernel: [eagle-usb] Modem operational !!
Aug 7 12:44:21 localhost kernel: [eagle-usb] Ethernet device eth1 created.
Aug 7 14:42:52 localhost devfsd: mksymlink: error creating symlink: tty/0^INot a directory
- - - - repeated many many times - - - -
Aug 7 14:42:52 localhost rc.sysinit: Lancement du service
DevFs? : succeeded
Aug 7 12:43:02 localhost logger: Options successfully sent to driver. <13>Aug 7 12:43:02 logger: Using DSP code for POTS line
Aug 7 12:43:02 localhost logger: Options successfully sent to driver. <13>Aug 7 12:43:02 logger: Using DSP code for POTS line
Aug 7 12:44:12 localhost ifup-ppp: pppd started for ppp0 on at
Aug 7 12:44:12 localhost pppd[2012]: pppd 2.4.2 started by root, uid 0
Aug 7 12:44:12 localhost ifup: Using interface ppp0
Aug 7 12:44:12 localhost pppd[2012]: Connect: ppp0 <--> /dev/pts/0
Aug 7 12:44:12 localhost ifup:
Aug 7 12:44:12 localhost ifup: Connect: ppp0 <--> /dev/pts/0
Aug 7 12:44:13 localhost pppoa[2054]: Packet not from driver (mac: 0:60:4c: f:b1:63)
Aug 7 12:44:15 localhost ifup: PAP authentication succeeded
Aug 7 12:44:15 localhost pppd[2012]: local IP address 82.64.198.197 <29>Aug 7 12:44:15 pppd[2012]: remote IP address 192.168.254.254
Aug 7 12:44:15 localhost ifup: local IP address 82.64.198.197
Aug 7 12:44:15 localhost ifup: remote IP address 192.168.254.254
Aug 7 12:44:15 localhost ifup: primary DNS address 213.228.0.23
Aug 7 12:44:15 localhost ifup: secondary DNS address 212.27.39.1
Aug 7 12:44:15 localhost network: Activation de l'interface ppp0 : succeeded
Aug 7 12:44:16 localhost shorewall: Loading /usr/share/shorewall/functions...
