Install of Mandrakelinux 10 Official

0h18 reboot on CDROM Mandrakelinux 10 Official PowerPack?
0h34 ask for cd 4 & 5 => Cancel, begin post-installation
0h38 first boot under gnome
0h41 reboot after changing /etc/lilo.conf with noapic acpi=off ('cause of VIA chipset on MSI 6380 K7T266 Pro2)
0h43 KDE booted (instead of Gnome... well...) launched drakxtools for internet connection

Conclusion (at first)

It works with drakxtools ! Thanks Thierry !

[root@localhost root]# rpm -q drakxtools
drakxtools-10-29mdk

Only remaining martian source :-(

Apr 17 00:38:03 localhost drakconnect[3430]: running: /etc/sysconfig/network-scripts/net_cnx_up &
Apr 17 00:38:03 localhost kernel: [EAGLE-USB] EU_IO_OPTIONS : Eth device already open.
Apr 17 00:38:03 localhost pppd[4060]: pppd 2.4.1 started by root, uid 0
Apr 17 00:38:03 localhost pppd[4060]: Using interface ppp0
Apr 17 00:38:03 localhost pppd[4060]: Connect: ppp0 <--> /dev/pts/3
Apr 17 00:38:06 localhost pppd[4060]: Couldn't set pass-filter in kernel: Invalid argument
Apr 17 00:38:06 localhost pppd[4060]: local IP address 82.64.140.224
Apr 17 00:38:06 localhost pppd[4060]: remote IP address 192.168.254.254
Apr 17 00:38:06 localhost pppd[4060]: primary DNS address 212.27.32.176
Apr 17 00:38:06 localhost pppd[4060]: secondary DNS address 212.27.39.1
Apr 17 00:38:31 localhost kernel: martian source 82.64.140.224 from 127.0.0.1, on dev ppp0
Apr 17 00:38:31 localhost kernel: ll header: 45:00:00:28
Apr 17 00:39:15 localhost kernel: martian source 82.64.140.224 from 127.0.0.1, on dev ppp0
Apr 17 00:39:15 localhost kernel: ll header: 45:00:00:28
Apr 17 00:39:16 localhost kernel: martian source 82.64.140.224 from 127.0.0.1, on dev ppp0
Apr 17 00:39:16 localhost kernel: ll header: 45:00:00:28
Apr 17 00:39:25 localhost kernel: martian source 82.64.140.224 from 127.0.0.1, on dev ppp0

Steps followed in drakxtools

tail -f /var/log/messages in a terminal window logged as root (su -)

---